Scatter file is a file used to describe the loads of regions in a specific android device running MediaTek’s ARM architecture. So scatter file is needed to flash/download ROMs, recoveries, logo etc. Must people uses wrong scatter file and get errors during flashing ROMs.So you need a scatter file to use SP flash tool in fixing a bricked Android or flashing files to it
If you’re looking for a tutorial on how to make a scatter file for your MTK/MT Android device, then you’ve come to the right place.
How To Make Scatter File.
To create a scatter file, you need to have the entire requirement below:
=>MTK/MediaTek based smartphone
=>USB Data Cable
=>USB ADB drivers installer: Click HERE to download it
=>MTK Droid Tools: Click HERE to download it
Note:The steps below are applicable for android devices with MT6595, MT6582, MT6589, MT6592, MT6577, MT6589T, MT6572
Step 1 – Enable USB debugging from your android device.
Step 2 – Connect your android device to your PC via USB cable and driver will install automatically since we have USB ADB VCOM drivers installed.
Step 3 – Extract, and run the MTK Droid Tools.
Step 4 – The MTK Droid will display your phone information
Step 5 – Click ‘blocks map’.
Step 6 – Click ‘create scatter file’ and Navigate to where you want to save it. Save it in a place where you won’t lose it.
Click HERE to learn how to flash MTK Android Smartphones Stock ROMs With SP Flash Tool
Click HERE to downlaod ufarblog android app for better browsing